A compact module designed specifically for the cooling demand of the water point in the pharmaceutical water system. As a sub-circuit in the hot water system, this module has a continuous disinfection effect even when it is not in use. The cooled injection water will not return to the main system.
The water point cooling module conforms to the relevant regulations and standards of the pharmaceutical industry. With its unique design, it can provide high shear force and turbulence,
It minimizes the risk of biofilm accumulation and ensures effective heat transfer. All parts in contact with materials in the whole system are electropolished, and the tubes used are seamless.
For fast and convenient installation, the cooler is provided as a complete and independent module with pitot tube arrangement and control valve.
Easy to install: Eling-PHC is designed as a plug-and-play module
Sanitary design: Reynolds number>4000 is kept in standby state, and main line speed >1 m/s. No internal weld, completely drainable, no dead corner.
Quick response: the cooled water can be obtained within a few seconds
The waste of purified water is minimized due to low retention and rapid response
Cold point use
low temperature liquid dispensing
